CORDSTRIPPER system

Color display with digital display of the target and actual values of Vulcanizing time and vulcanizing temperature

Display of the remaining curing time (timer)

Signal tone after the vulcanization time has elapsed

Display of the current consumption in amperes of the 3 phases per
heating platePrecise temperature measurement in the heating plates via PT100Temperature difference monitoring with ±2.5°C of all connectedconnected heating platesController tolerance approx. 1% of the set value (e.g. at 145°C approx. 1.5°C)Switch cabinet for 1 or 2 pairs of heating plates (2 or 4-fold), Input 32 or 63AConnection of electric pressure pumps for three-phase currentManual operation possibleElectrical connections according to CEE, Harting (UL/CSA)Applicable directives DIN EN, DIN VDE, IECOptionally also available with the data logging system “SPLICE-
WATCH” data logging system

Precise temperature measurement in the heating plates via PT100

Temperature difference monitoring with ±2.5°C of all connectedconnected heating plates

Controller tolerance approx. 1% of the set value (e.g. at 145°C approx. 1.5°C)

Switch cabinet for 1 or 2 pairs of heating plates (2 or 4-fold), Input 32 or 63A

Connection of electric pressure pumps for three-phase current

Manual operation possible

Electrical connections according to CEE, Harting (UL/CSA)

Applicable directives DIN EN, DIN VDE, IEC

Optionally also available with the data logging system “SPLICE-
WATCH” data logging system