Suitable for belt widths from 900-1600mm.
Heating length of 810mm.
Design rhombic 22°
Two-part aluminum construction for quick assembly and disassembly.
Heating plate with silicone heating element.
Extremely short heating and cooling times.
Heating plate for air or water cooling.
Specific pressure: 70N/cm² (100 psi).
Simple and fast pressure build-up using compressed air.
Integrated air control unit with pressure gauge and safety valve.
Aramid-reinforced pressure bag.
Fully integrated electrical control in the frame.
Electronic temperature control for monitoring the set and current temperature of both heating plates.
For longer connection lengths, several press sections can be arranged next to each other.
400V, 50/60Hz, 3Ph+N+PE (other voltages on request).
The tension bolts no longer protrude beyond the upper edge of the press.
The tension bolts can be swiveled in – with the same belt thickness, it is no longer necessary to unscrew and screw them on when opening the press.
The overall weight has been reduced by approx. 15 % despite the robust design.
The maximum pressure is currently 7 bar
Color display with digital display of the target and actual values of Vulcanizing time and vulcanizing temperature
Display of the remaining curing time (timer)
Signal tone after the vulcanization time has elapsed
WATCH” data logging system
Precise temperature measurement in the heating plates via PT100
Temperature difference monitoring with ±2.5°C of all connectedconnected heating plates
Controller tolerance approx. 1% of the set value (e.g. at 145°C approx. 1.5°C)
Switch cabinet for 1 or 2 pairs of heating plates (2 or 4-fold), Input 32 or 63A
Connection of electric pressure pumps for three-phase current
Manual operation possible
Electrical connections according to CEE, Harting (UL/CSA)
Applicable directives DIN EN, DIN VDE, IEC
Optionally also available with the data logging system “SPLICE-
WATCH” data logging system
