With repair presses, the narrow heating plates with the corresponding pressure pads can be placed on the repair area. The repair area can be positioned anywhere on the belt width. The lightweight and robust EMU beams are designed according to the required surface pressure and the maximum belt width. Repair presses are available for almost all conveyor belt widths.
For patch, edge and longitudinal crack repairs with heating system in sandwich construction, pressure cushion system and EMU traverses
Patch repairs:
Standard heating surface 500 x 500 mm
The height of the crossbar profiles depends on the surface pressure and the maximum belt width
Number of traverse pairs 3
Edge and longitudinal crack repairs:
Standard heating width 500 mm (*other heating widths on request)
Heating length according to customer requirements
The height of the crossbar profiles depends on the surface pressure and the maximum belt width
The number of pairs of crossbars depends on the surface pressure and the heating length
SPLICE-WATCH ready
Discover more products from WAGENER Vulcanizers.
Color display with digital display of the target and actual values of Vulcanizing time and vulcanizing temperature
Display of the remaining curing time (timer)
Signal tone after the vulcanization time has elapsed
WATCH” data logging system
Precise temperature measurement in the heating plates via PT100
Temperature difference monitoring with ±2.5°C of all connectedconnected heating plates
Controller tolerance approx. 1% of the set value (e.g. at 145°C approx. 1.5°C)
Switch cabinet for 1 or 2 pairs of heating plates (2 or 4-fold), Input 32 or 63A
Connection of electric pressure pumps for three-phase current
Manual operation possible
Electrical connections according to CEE, Harting (UL/CSA)
Applicable directives DIN EN, DIN VDE, IEC
Optionally also available with the data logging system “SPLICE-
WATCH” data logging system
