WAGENER Vulcanizers GmbH & Co. KG
Reisholzstraße 15
40721 Hilden – Germany
C.S. Fudickar GmbH, Hilden
Düsseldorf Local Court HRB 45657
Managing Director:
Mr. Matthias Dierks
Phone: +49 2103 951-220
Fax: +49 2103 951-229
info@wagenervulcanizers.com
Entry in the commercial register.
Register court: Düsseldorf Local Court
Register number: HRA 16143
Sales tax identification number according to §27 a sales tax law:
DE 121379694
We are not willing or obliged to participate in dispute resolution proceedings before a consumer arbitration board.
As a service provider we are responsible according to § 7 Abs.1
TMG, we are responsible for our own content on these pages in accordance with the general laws.
According to §§ 8 to 10 TMG, however, we as a service provider are not obliged to monitor transmitted or stored third-party information or to investigate circumstances that indicate illegal activity.
Obligations to remove or block the use of information in accordance with general legislation remain unaffected by this.
However, liability in this respect is only possible from the time we become aware of a specific infringement.
As soon as we become aware of such infringements, we will remove this content immediately.
Liability for links
Our website contains links to external third-party websites over whose content we have no influence.
Therefore, we cannot accept any liability for this third-party content.
The respective provider or operator of the pages is always responsible for the content of the linked pages.
The linked pages were checked for possible legal violations at the time of linking.
Illegal content was not recognizable at the time of linking.
However, permanent monitoring of the content of the linked pages is not reasonable without concrete evidence of an infringement.
If we become aware of any legal infringements, we will remove such links immediately.
The content and works created by the site operators on these pages are subject to German copyright law.
Duplication, processing, distribution and any form of commercialization of such material beyond the scope of the copyright law shall require the prior written consent of its respective author or creator.
Downloads and copies of this site are only permitted for private, non-commercial use.
Insofar as the content on this site was not created by the operator, the copyrights of third parties are respected.
In particular, third-party content is identified as such.
Should you nevertheless become aware of a copyright infringement, please inform us accordingly.
If we become aware of any infringements, we will remove such content immediately.
Copyright © 2022.
Subject to change without notice.
Color display with digital display of the target and actual values of Vulcanizing time and vulcanizing temperature
Display of the remaining curing time (timer)
Signal tone after the vulcanization time has elapsed
WATCH” data logging system
Precise temperature measurement in the heating plates via PT100
Temperature difference monitoring with ±2.5°C of all connectedconnected heating plates
Controller tolerance approx. 1% of the set value (e.g. at 145°C approx. 1.5°C)
Switch cabinet for 1 or 2 pairs of heating plates (2 or 4-fold), Input 32 or 63A
Connection of electric pressure pumps for three-phase current
Manual operation possible
Electrical connections according to CEE, Harting (UL/CSA)
Applicable directives DIN EN, DIN VDE, IEC
Optionally also available with the data logging system “SPLICE-
WATCH” data logging system
